I've used the lovely PTU artwork of Zindy S. D. Nielsen. You can purchase her art and a license HERE.
This is a PTU kit called Winter Angel by Seven’s Scraps. You can visit her blog for links HERE.
I've used a Template #5 by Kirsty’s Designs. It can be downloaded HERE.
The masks are included in my supplies, which are for personal use only and can be downloaded HERE. Add them to your mask folder.
Font used is Scriptina.
Let’s Begin!
Open the tag template, and resize the canvas from the center to 800x800 by going to
Image>Canvas Size.
Delete the credits layer and Broken wordart layer.
Open paper22 from the kit.
Copy your paper and go to the template.
On your rectangle-1 layer, go to Selections>Select All, Selections>Float, Selections>Defloat.
Paste your paper by going to Edit>Paste As New Layer.
Then go to Selections>Invert and press the Delete button on your keyboard to delete the extra paper.
Be sure to delete the original layer of the template.
(Follow this procedure when asked to Copy and Paste a paper to a layer of the template.)
Open paper28 from kit.
Copy and Paste this paper to rectangle-2 layer of the template.
Open paper27 from kit.
Copy and Paste it above the layer names Back.
Add your mask by going to Layer>Load/ Save Mask>Load Mask from Disk.
Apply the mask named stripe4.
Merge the mask group by right clicking the layer of the finished mask, go to Merge>Merge Group.
Resize and arrange mask to fit right behind the rectangle as shown in the tag.
Delete the layer named Back.
Open paper02 from kit.
Copy and Paste it below the previous mask layer.
Add your mask by going to Layer>Load/ Save Mask>Load Mask from Disk.
Apply the mask named circle4.
Merge the mask group by right clicking the layer of the finished mask, go to Merge>Merge Group.
Resize and arrange mask to fit as shown in the tag.
Open frame26 from kit.
Copy and Paste it above the circle mask layer.
Resize and arrange it in the center as shown.
Open splashes01 from kit.
Copy and Paste it above the previous layer.
Resize it a little larger and arrange it centered as shown in tag.
Delete the layer named Sparklies.
Open doodle05 from kit.
Copy and Paste it above the stripe mask layer.
Image>Mirror
Resize and arrange it to the upper left had corner as shown.
Duplicate the layer and mirror and flip it by going to
Image>Mirror, Image>Flip
Open glitterrain01 from kit.
Copy and Paste it above the blur rectangle layer.
Resize and arrange it within the rectangle as shown in tag.
Open wings01 from kit.
Resize image by going to Image>Resize and resize to 300 pixels wide.
With the crop tool, crop the right wing out of the image so only the left wing shows.
Copy and Paste it above the wings layer.
Arrange it to the right of the word “angel” above the wing template.
Duplicate the layer and Image>Mirror so it is on the right of the word also.
Delete the Wings layer of the template.
Copy and Paste your tube as a new layer above the glitter rain.
Resize and arrange it to the left of the rectangle making sure to line up the tubes edges with the corner of the rectangle.
Open ribbon05 from kit.
Copy and Paste it above the tube layer.
Resize and arrange it just above the wordart as shown in tag.
Open moom01 from kit.
Image>Mirror
Copy and Paste it above the other layer.
Resize and arrange it to the right as shown in tag.
Open butterfly01 from kit.
Copy and Paste it on top of the other layers.
Resize and arrange it as shown in tag.
Open sparkle01 from kit.
Copy and Paste it above the tube layer.
Select the angel wordart and recolor to match the tag. I used color #547291.
Go to Selections>Select All, Selections>Float, Selections>Defloat
Selection>Modify>Expand and expand by 3.
Layer>New Raster Layer, and Floodfill with white.
Selection>Select None
Move this layer below the blue angel wordart, merge them together.
I used the font Scriptina. I set it to 72 pixels, Bold, Kerning set to -50, and a stroke width of 6.
Foreground color to white and background color to #547291.
Duplicate the layer and select the second font layer with the font tool.
Set the stroke width to 0.
Merge the 2 font layer and convert to a raster layer.
Drop shadow everything except the sparkle and the mask.
Effects>3D Effects>Drop Shadow, set the drop to 3 vertical, 2 horizontal, 50 opacity, 4 blur.
Add your copyright info and your tag.
Merge everything in Layers>Merge>Merge Visible
All Finished!
This is a PTU kit called Winter Angel by Seven’s Scraps. You can visit her blog for links HERE.
I've used a Template #5 by Kirsty’s Designs. It can be downloaded HERE.
The masks are included in my supplies, which are for personal use only and can be downloaded HERE. Add them to your mask folder.
Font used is Scriptina.
Let’s Begin!
Open the tag template, and resize the canvas from the center to 800x800 by going to
Image>Canvas Size.
Delete the credits layer and Broken wordart layer.
Open paper22 from the kit.
Copy your paper and go to the template.
On your rectangle-1 layer, go to Selections>Select All, Selections>Float, Selections>Defloat.
Paste your paper by going to Edit>Paste As New Layer.
Then go to Selections>Invert and press the Delete button on your keyboard to delete the extra paper.
Be sure to delete the original layer of the template.
(Follow this procedure when asked to Copy and Paste a paper to a layer of the template.)
Open paper28 from kit.
Copy and Paste this paper to rectangle-2 layer of the template.
Open paper27 from kit.
Copy and Paste it above the layer names Back.
Add your mask by going to Layer>Load/ Save Mask>Load Mask from Disk.
Apply the mask named stripe4.
Merge the mask group by right clicking the layer of the finished mask, go to Merge>Merge Group.
Resize and arrange mask to fit right behind the rectangle as shown in the tag.
Delete the layer named Back.
Open paper02 from kit.
Copy and Paste it below the previous mask layer.
Add your mask by going to Layer>Load/ Save Mask>Load Mask from Disk.
Apply the mask named circle4.
Merge the mask group by right clicking the layer of the finished mask, go to Merge>Merge Group.
Resize and arrange mask to fit as shown in the tag.
Open frame26 from kit.
Copy and Paste it above the circle mask layer.
Resize and arrange it in the center as shown.
Open splashes01 from kit.
Copy and Paste it above the previous layer.
Resize it a little larger and arrange it centered as shown in tag.
Delete the layer named Sparklies.
Open doodle05 from kit.
Copy and Paste it above the stripe mask layer.
Image>Mirror
Resize and arrange it to the upper left had corner as shown.
Duplicate the layer and mirror and flip it by going to
Image>Mirror, Image>Flip
Open glitterrain01 from kit.
Copy and Paste it above the blur rectangle layer.
Resize and arrange it within the rectangle as shown in tag.
Open wings01 from kit.
Resize image by going to Image>Resize and resize to 300 pixels wide.
With the crop tool, crop the right wing out of the image so only the left wing shows.
Copy and Paste it above the wings layer.
Arrange it to the right of the word “angel” above the wing template.
Duplicate the layer and Image>Mirror so it is on the right of the word also.
Delete the Wings layer of the template.
Copy and Paste your tube as a new layer above the glitter rain.
Resize and arrange it to the left of the rectangle making sure to line up the tubes edges with the corner of the rectangle.
Open ribbon05 from kit.
Copy and Paste it above the tube layer.
Resize and arrange it just above the wordart as shown in tag.
Open moom01 from kit.
Image>Mirror
Copy and Paste it above the other layer.
Resize and arrange it to the right as shown in tag.
Open butterfly01 from kit.
Copy and Paste it on top of the other layers.
Resize and arrange it as shown in tag.
Open sparkle01 from kit.
Copy and Paste it above the tube layer.
Select the angel wordart and recolor to match the tag. I used color #547291.
Go to Selections>Select All, Selections>Float, Selections>Defloat
Selection>Modify>Expand and expand by 3.
Layer>New Raster Layer, and Floodfill with white.
Selection>Select None
Move this layer below the blue angel wordart, merge them together.
I used the font Scriptina. I set it to 72 pixels, Bold, Kerning set to -50, and a stroke width of 6.
Foreground color to white and background color to #547291.
Duplicate the layer and select the second font layer with the font tool.
Set the stroke width to 0.
Merge the 2 font layer and convert to a raster layer.
Drop shadow everything except the sparkle and the mask.
Effects>3D Effects>Drop Shadow, set the drop to 3 vertical, 2 horizontal, 50 opacity, 4 blur.
Add your copyright info and your tag.
Merge everything in Layers>Merge>Merge Visible
All Finished!
No comments:
Post a Comment