Winter Angel- PTU

I've used the lovely PTU artwork of Zindy S. D. Nielsen. You can purchase her art and a license HERE.
This is a PTU kit called Winter Angel by Seven’s Scraps. You can visit her blog for links HERE.
I've used a Template #5 by Kirsty’s Designs. It can be downloaded HERE.
The masks are included in my supplies, which are for personal use only and can be downloaded HERE. Add them to your mask folder.
Font used is Scriptina.


Let’s Begin!


Open the tag template, and resize the canvas from the center to 800x800 by going to
Image>Canvas Size.
Delete the credits layer and Broken wordart layer.

Open paper22 from the kit.
Copy your paper and go to the template.
On your rectangle-1 layer, go to Selections>Select All, Selections>Float, Selections>Defloat.
Paste your paper by going to Edit>Paste As New Layer.
Then go to Selections>Invert and press the Delete button on your keyboard to delete the extra paper.
Be sure to delete the original layer of the template.
(Follow this procedure when asked to Copy and Paste a paper to a layer of the template.)

Open paper28 from kit.
Copy and Paste this paper to rectangle-2 layer of the template.

Open paper27 from kit.
Copy and Paste it above the layer names Back.
Add your mask by going to Layer>Load/ Save Mask>Load Mask from Disk.
Apply the mask named stripe4.
Merge the mask group by right clicking the layer of the finished mask, go to Merge>Merge Group.
Resize and arrange mask to fit right behind the rectangle as shown in the tag.
Delete the layer named Back.

Open paper02 from kit.
Copy and Paste it below the previous mask layer.
Add your mask by going to Layer>Load/ Save Mask>Load Mask from Disk.
Apply the mask named circle4.
Merge the mask group by right clicking the layer of the finished mask, go to Merge>Merge Group.
Resize and arrange mask to fit as shown in the tag.

Open frame26 from kit.
Copy and Paste it above the circle mask layer.
Resize and arrange it in the center as shown.

Open splashes01 from kit.
Copy and Paste it above the previous layer.
Resize it a little larger and arrange it centered as shown in tag.

Delete the layer named Sparklies.

Open doodle05 from kit.
Copy and Paste it above the stripe mask layer.
Image>Mirror
Resize and arrange it to the upper left had corner as shown.
Duplicate the layer and mirror and flip it by going to
Image>Mirror, Image>Flip

Open glitterrain01 from kit.
Copy and Paste it above the blur rectangle layer.
Resize and arrange it within the rectangle as shown in tag.

Open wings01 from kit.
Resize image by going to Image>Resize and resize to 300 pixels wide.
With the crop tool, crop the right wing out of the image so only the left wing shows.
Copy and Paste it above the wings layer.
Arrange it to the right of the word “angel” above the wing template.
Duplicate the layer and Image>Mirror so it is on the right of the word also.
Delete the Wings layer of the template.

Copy and Paste your tube as a new layer above the glitter rain.
Resize and arrange it to the left of the rectangle making sure to line up the tubes edges with the corner of the rectangle.

Open ribbon05 from kit.
Copy and Paste it above the tube layer.
Resize and arrange it just above the wordart as shown in tag.

Open moom01 from kit.
Image>Mirror
Copy and Paste it above the other layer.
Resize and arrange it to the right as shown in tag.

Open butterfly01 from kit.
Copy and Paste it on top of the other layers.
Resize and arrange it as shown in tag.

Open sparkle01 from kit.
Copy and Paste it above the tube layer.

Select the angel wordart and recolor to match the tag. I used color #547291.
Go to Selections>Select All, Selections>Float, Selections>Defloat
Selection>Modify>Expand and expand by 3.
Layer>New Raster Layer, and Floodfill with white.
Selection>Select None
Move this layer below the blue angel wordart, merge them together.

I used the font Scriptina. I set it to 72 pixels, Bold, Kerning set to -50, and a stroke width of 6.
Foreground color to white and background color to #547291.
Duplicate the layer and select the second font layer with the font tool.
Set the stroke width to 0.
Merge the 2 font layer and convert to a raster layer.

Drop shadow everything except the sparkle and the mask.
Effects>3D Effects>Drop Shadow, set the drop to 3 vertical, 2 horizontal, 50 opacity, 4 blur.

Add your copyright info and your tag.

Merge everything in Layers>Merge>Merge Visible

All Finished!

Heartless- PTU

I've used the lovely PTU artwork of Zindy S. D. Nielsen. You can purchase her art and a license HERE.
This is a PTU kit called Heartless by Seven’s Scraps. You can visit her blog for links HERE.
I've used a Template #189 by Divine Intentionz. It can be downloaded HERE.
The mask is by Vixen, #399. Download it on her blog HERE.
Font used is Unnamed Melody.


Let’s Begin!


Open the tag template, and resize the canvas from the center to 800x800 by going to
Image>Canvas Size.
Delete the credits layer.

Open paper28 from the kit.
Resize your paper by going to Image>Resize, and resize it to 350 pixels wide.
Copy your paper and go to the template.
On your rectangle layer, go to Selections>Select All, Selections>Float, Selections>Defloat.
Paste your paper by going to Edit>Paste As New Layer.
Then go to Selections>Invert and press the Delete button on your keyboard to delete the extra paper.
Be sure to delete the original layer of the template.
(Follow this procedure when asked to Copy and Paste a paper to a layer of the template.)

Open frame10 from kit.
Copy and Paste it below the rectangle layer.
Resize and arrange it behind the rectangle as shown in tag.

Open stars 01, 02, and 03 from kit.
Copy and Paste them above the stars layer.
Resize, duplicate, and arrange them as shown above the stars in the bottom left corner.
Merge all the star layers together.
Image> Mirror, Image>Flip to get them in the top right corner.
Delete the original stars layer from tag when done.

Open butterfly02 from kit.
Image>Mirror
Copy and Paste it above the stars layers.
Resize and arrange it as shown in tag.

Open glitter02 from kit.
Copy and Paste it above the rectangle layer.
Resize and arrange it within the rectangle at the top as shown in tag.

Open glitter05 from kit.
Copy and Paste it below the rectangle layer.
Resize and arrange it to the top left as shown in tag.
Image>Mirror, Image>Flip

Open flower04 and rose08 from kit.
Copy and Paste them below the rectangle layer.
Resize, duplicate each, and arrange them as shown in the tag.

Open heart01 from kit.
Copy and Paste it above the rectangle layer.
Resize and arrange it to the bottom right corner as shown.

Copy and Paste your tube as a new layer below the stars.
Resize and arrange it as shown in the tag.

Open light01 from kit.
Copy and Paste it above all the layers.
Resize and arrange it so the light is shining right in the face.

Open paper04 from kit.
Copy and Paste it at the bottom, below the frame.
Add your mask by going to Layer>Load/ Save Mask>Load Mask from Disk.
Apply the mask named Vix_Mask399.
Merge the mask group by right clicking the layer of the finished mask, go to Merge>Merge Group.

I used the font Unnamed Melody. I set it to 48 pixels, and the color is white.

Drop shadow everything except the light and the mask.
Effects>3D Effects>Drop Shadow, set the drop to 3 vertical, 2 horizontal, 75 opacity, 4 blur.

Add your copyright info and your tag.

Merge everything in Layers>Merge>Merge Visible

All Finished!

Fallen Beauty- PTU

I've used the lovely PTU artwork of Suzanne Woolcott at Gorjuss. You can purchase her art and a license HERE.
This is a PTU tagger kit called Fallen by Cora’s Creations (formally Pimp’d Designz). You can visit her blog for links HERE or HERE.
I've used a Template #199 by Divine Intentionz. It can be found in the right column on her blog HERE.
The mask is WSL_Mask81 by Wee Scott Lass Creations. Download it on her blog HERE.
Font used is Baroque Script.


Let’s Begin!


Open the tag template, and resize the canvas from the center to 600x600 by going to
Image>Canvas Size.
Delete the credits layer.

Open paper pp02 from the kit.
Copy your paper and go to the template.
On the layer named background frame, go to Selections>Select All, Selections>Float, Selections>Defloat.
Paste your paper by going to Edit>Paste As New Layer.
Then go to Selections>Invert and press the Delete button on your keyboard to delete the extra paper.
Be sure to delete the original layer of the template.
(Follow this procedure when asked to Copy and Paste a paper to a layer of the template.)

Open paper pp03.
Copy and Paste this paper to frame layer of the template.

Open paper pp01.
Copy and Paste this paper to layers circle1 and circle2 of the template.

Open paper pp09.
Copy and Paste this paper to layers thin rectangle1 and thin rectangle2 of the template.

Open paper pp08.
Copy and Paste this paper to layers thin rectangle3 and thin rectangle4 of the template.

Open window frame from kit.
Copy and Paste it above top layer of template.
Resize and arrange it in center of canvas.

Open tube background that comes with Gorjuss tube.
Copy and Paste it below the window.
Resize and arrange it below the window so the sky shows through.
Erase any extra that hangs out the sides.

Open cloud-01 from kit.
Copy and Paste it below the window and its background.
Resize and arrange it to the upper left of the window.

Open cloud-02 from kit.
Copy and Paste it above the first cloud.
Resize and arrange it to the right of the window.

Open lights from kit.
Copy and Paste it above the window.
Rotate it 90 degrees to the right.
Resize and arrange it to the bottom of the window.

Open tree from kit.
Copy and Paste it above the circles from the template.
Resize and arrange it to the left of the right template.

Open string-01 from kit.
Recolor it to match your work.
Copy and Paste it above the window.
Mirror it by going to Image>Mirror.
Resize and arrange it at the bottom of the window.

Open flower-03 from kit.
Copy and Paste it above the cloud layers.
Resize and arrange it to the left of the window.

Open flower-02 from kit.
Copy and Paste it above the previous flower.
Resize and arrange it to the left of the window.

Open flower-05 from kit.
Copy and Paste it above the previous flower.
Resize and arrange it to the left of the window.

Open flower-04 from kit.
Copy and Paste it above the top layer.
Resize and arrange it to the left of the window as shown.

Open greens-02 from kit.
Copy and Paste it above the clouds.
Flip layer by going to Image>Flip.
Resize and arrange it to the top left of the flowers.

Open tab-09 from kit.
Copy and Paste it above the window.
Resize and arrange it to the top left of the window.

Open bow02 from kit.
Copy and Paste it above the tab.
Resize and arrange it to the top of the tab.

Open staple from kit.
Copy and Paste into your canvas.
Resize and arrange it to the left of your work as shown.

Open notebook-paper from kit.
Copy and Paste it below the bottom layer.
Resize and arrange it as shown.

Copy and Paste your tube as a new layer on top.
Arrange it to the right of the window.

Open paper pp02 and Copy and Paste it above the notebook-paper.
Add your mask by going to Layer>Load/ Save Mask>Load Mask from Disk.
Apply the mask named WSL_Mask81.
Merge the mask group by right clicking the layer of the finished mask, go to Merge>Merge Group.
Resize and arrange mask to fit as shown in the tag.

I used the font Baroque Script. I set it to 72 pixels, and a stroke width of 6.
Foreground color to white and background color to #7f2119.
Duplicate the layer and select the second font layer with the font tool.
Set the stroke width to 0.
Merge the 2 font layer and convert to a raster layer.

Drop shadow everything except the mask.
Effects>3D Effects>Drop Shadow, set the drop to 3 vertical, 2 horizontal, 75 opacity, 4 blur.

Add your copyright info and your tag.

Merge everything in Layers>Merge>Merge Visible


All Finished!

So Blue- PTU

I've used the lovely PTU artwork of Suzanne Woolcott at Gorjuss. You can purchase her art and a license HERE.
This is a PTU tagger kit called So Blue by Heartfelt Perfections. You can visit her blog for links to her stores HERE.
I've used a Template #850 by Essence of Creativity. It can be downloaded HERE.
The mask is by Vixen, #404. Download it on her blog HERE.
My supplies are for personal use only and can be downloaded HERE.
Font used is Missed Your Exit.


Let’s Begin!


Open the tag template, and resize the canvas from the center to 800x800 by going to
Image>Canvas Size.
Delete the credits layer.

Open paper10 from the kit.
Copy your paper and go to the template.
On your rectangle layer, go to Selections>Select All, Selections>Float, Selections>Defloat.
Paste your paper by going to Edit>Paste As New Layer.
Then go to Selections>Invert and press the Delete button on your keyboard to delete the extra paper.
Be sure to delete the original layer of the template.
(Follow this procedure when asked to Copy and Paste a paper to a layer of the template.)

Open paper5.
Copy and Paste this paper to doodle layer of the template.

Erase text layer and replace with So Blue Line Wordart from supplies.
Duplicate layer and place at the bottom of the rectangle.

Open So Blue Wordart from supplies.
Copy and Paste it on top of all the layers.

Open fabric button 2 from kit.
Copy and Paste it below the wordart.
Resize, duplicate, and arrange them as shown in tag.

Open white daisy 2 from kit.
Copy and Paste it below the wordart.
Resize, duplicate, and arrange them as shown in tag.

Open leaf from kit.
Copy and Paste it below the rectangle layer.
Resize, duplicate, and arrange them as shown in tag.

Open satinrib2 from kit.
Copy and Paste it below the white daisies layer.
Resize and arrange them as shown in tag.

Open edge2 from kit.
Copy and Paste it below the square layer.
Resize and arrange it to the right as shown in tag.

Copy and Paste your tube as a new layer on top.
Arrange it to the right above the square.

Floodfill the background layer with color #204969.
Add your mask by going to Layer>Load/ Save Mask>Load Mask from Disk.
Apply the mask named Vix_Mask404.
Merge the mask group by right clicking the layer of the finished mask, go to Merge>Merge Group.
Resize and arrange mask to fit as shown in the tag.

I used the font Missed Your Exit. I set it to 48 pixels, and a stroke width of 6.
Foreground color to white and background color to #204969.
Duplicate the layer and select the second font layer with the font tool.
Set the stroke width to 0.
Merge the 2 font layer and convert to a raster layer.

Drop shadow everything except the mask.
Effects>3D Effects>Drop Shadow, set the drop to 3 vertical, 2 horizontal, 75 opacity, 4 blur.

Add your copyright info and your tag.

Merge everything in Layers>Merge>Merge Visible


All Finished!